Modern Problems of Materials Science

Analysis of the Structural and Mechanical State of Heat-Resistant Steel Operated in Steam Turbine Blades

Keywords

steel 20Х13, steam turbine blades, structure, mechanical power, fractography

Abstract

The structure and mechanical properties of the steam turbine blade steel were analyzed. It was found that the plasticity characteristics and impact toughness values of operated steel were slightly lower than the regulated ones. The corrosion-active non-metallic inclusions were revealed in the steel structure, increasing the corrosion damage of steel during operation under technological conditions.

References

  1. Solovei P., Tsybailo I., Krechkovska S. Structure and mechanical properties of steel steam turbine rotor blades after operation // Young Scientists Conf. on Materials Science and Surface Engineering MSSE2023. Proceedings. Lviv. – P.67–70.
  2. Berruti T., Firrone C.M., Pizzolante M., Gola M.M. Fatigue damage prevention on turbine blades: study of underplatform damper shape // Key Eng. Mater. – 2007. – 347. – P. 159–164.
  3. Ziegler D., Puccinelli M., Bergallo B., Picasso A. Investigation of turbine blade failure in a thermal power plant // Case Stud. Eng. Fail. Anal. – 2013. – 1. – P. 192–199.
  4. Tulsidas D., Shantharaja M., Bharath V.G., Life estimation of a steam turbine blade using low cycle fatigue analysis // Procedia Mat. Sci. – 2014 – 5. – P. 2392–2401.
  5. Booysen C., Heyns P.S., Hindley M.P., Scheepers R., Fatigue life assessment of a low-pressure steam turbine blade during transient resonant conditions using a probabilistic approach // Intern. J. Fatigue – 2015. –73. – P.17–26.
  6. Nurbanasari M., Abdurrachim, Crack of first stage blade in a steam turbine. Case Stud // Eng. Fail. Anal. – 2014. – 2. –P. 54–60.
  7. GOST 18968-73. Rods and steel made of corrosion-resistant and heat-resistant steel for steam turbine blades. Technical minds – since 01/01/1974. Date as of 01/01/2021. https://inconsulting.com.ua/gost/gost-18968-73. (in Ukrainian)