Modern Problems of Materials Science

Rabiei M., Padgurskas Ju., Rukuiza R.

A Brief Overview of Thermally Activated Delayed Fluorescence (TADF) Light Emitting Electrochemical Cells (LEECs)

Adzhamskyi S., Kononenko G., Podolskyi R., Safronova O., Baduk S.

Determination of Rational Parameters of LPBF in Order to Reduce Porosity

Canul Varguez B. J., Reyes Trujeque J., Soria Castro M., Quintana Owen P., Manrique Ortega M.

Application of Ca(Zn(OH)₃)₂·2H₂O (CZ) and MgO Nanoparticles for Consolidation Stones

Babachenko O., Kononenko G., Kimstach T., Podolskyi R., Safronova O.

Improving the Chemical Composition of High-Strength Special-Purpose Steels with the Formation of a Bainite Structure

Pedchenko Ye., Kostetskyi Yu., Polishko G., Petrenko V., Zaitsev V.

Recycling of Nickel Alloy Scrap and Waste Using the ESR Method in the Conditions of Limited Resources of RAW Materials to Preserve the Chemical Composition and Properties

Chudinovych O., Vedel D., Korichev S., Zamula M.

Interaction of Europium Oxide with Iron Oxide at 1300°C

Fatieiev D., Bychko I.

Influence of Hydride Phase on Hydrogenation Activity of the Cobalt Inermetallic Alloy

Kononiuk O., Vlad Kh.

Influence of Nanostructured Additives (Fe,Co,Ni)xOy on the Mechanochemical Hydrogenation of Mg

Kliuiev E., Ahaiev R., Vlasenko V., Dudlia K.

Potential Corrosion Challenges in the Extraction of Hydrogen and Methane by Pyrolysis of Carbonaceous RAW Materials

Kovbasiuk T., Kyrysha A., Hladchenko Z.

Technology of Applying Ni3B – Metal-Ceramic Tracks by Multilayer Screen Printing Method

Kyryliuk S., Tolochyn O., Bagliuk G., Tolochyna O., Kyryliuk Y.

Influence of Hot Forming Parameters on the Structure and Properties of the Alloy Inconel 625

Lemishka I., Kovbasiuk T., Andreiliv A., Halienkova O., Melashchenko O.

Microstructure and Granulometric Characteristics of Heat-Resistant Alloy Powders

Baranovska O., Baranovskyi D.

Microstructure and Tribological Performance of Reinforced Titanium Matrix Composites

Vlad Kh., Verbovytskyy Yu., Zavaliy I.

Electrochemical Properties of Ni–Fe Raney-Type Nanopowders Obtained via Leaching

Oryshych D., Stasiuk O.

Impact of Chemical Composition on Elastic Modulus of Ti-Zr-Nb Alloys

Osadchuk S., Nyrkova L.

Influence of Solution Layer Thickness on the Mechanism of Stress Corrosion Cracking of Low-Alloy Steel in a Simulated Soil Solution

Stasiuk O., Oryshych D., Taran S.

Effect of Powder Type on Microstructure and Mechanical Properties of Biocompatible Ti-Zr-Nb-Ta Alloy

Tolochyna O., Kyryliuk S., Kapp M., Danylenko V., Tolochyn O.

The Influence of the Shear Component of Deformation on the Microstructure Formation and Strength of Powder Materials

Tsaryk B., Makhnenko O.

Softening of Material During Friction Stir Welding of Aluminum Alloy 2219-T81

Ziqiao Zh.

Use of Epoxy-Modified Flux Systems for Underwater Submerged ARC Welding

Oprysk V., Verbovytskyy Yu.

Structural and Electrochemical Hydrogenation Characteristics of Y-Containing RNi3-xMnx (R = Y and lanthanides; x = 0…2) Alloys

Fasol Ye., Kubich V.

Influence of Yttrium Concentration on the Crystal Lattice Parameters of Sealing Coatings Applied by Flame Spraying Method

Yurchenko Yu., Sokolovskyi M.

Development of Technological Equipment for Laser Welding of Thin-Walled Joints from Corrosion-Resistant Steels

Teplinska M.-S., Zaremba O., Demchenko P., Kordan V., Gladyshevskii R.

Electrochemical Properties of Ba2HoCu3O7

Makrukha T., Prystash M.

Plasma Technologies for the Synthesis of Wear-Resistant Multifunctional Metal Matrix Composites of the Cu–Ti–TiC System

Khokhlov M., Gornostai O., Dyman M.

Mechanical Properties of Magnesium-Based Alloys for Orthopedic Applications

Naumenko M., Pedchenko Ye., Kostetskyi Yu., Rokytska O., Karpets M., Lukyanchuk D.

Properties of Fе-Mn-C-Al Steel, Alloyed with Cr, Si and Cu, After Electroslag Remelting

Shyshkina Yu., Rešetič A.

UV-Curable Polymer-Dispersed Liquid Crystal Elastomers

Demianchuk D.

Investigation of Brittle Fracture Resistance of Pipeline Steel Considering In-Service Conditions and Notch Orientation

Babchuk R., Uschapovskyi D., Vasyliev G.

Influence of Slicing on the Morphology and Structure of Deposited Copper

Zasadna V., Marchuk I., Bukliv R., Kaniuk Yu.

Application of Microcrystalline Cellulose/Polyaniline Composite for Removal of Food Dye Tartrazine from Aqueous Solutions

Shved M., Klimenko I., Belous V., Ovcharenko V., Tolmachova G., Podhurska V., Ishchenko M., Babayev I., Kuprin O.

Development and Investigation of Wear-Resistant Nitride Coatings on VT6 Titanium Alloy

Valchuk I., Hetman M., Kovtun O., Dytyniuk V.

Coatings to Prevent Adhesive wear in Steels

Lavrys S.

Microstructure and Corrosion Resistance of Nitrided Titanium Alloy Fabricated by Selective Laser Melting

Tyshyk Yu., Kuprin O., Reshetniak O., Milewski Ja., Podhurska V.

Protective Coatings on 316L Stainless Steel for Application as Molten Carbonate Fuel Cell Current Collectors

Tsybailo I., Krechkovska H.

Structure and Mechanical Properties of Heat‑Resistant Steel Restored after Long‑Term Operation in a TPP Steam Pipeline

Luzhetskiy R.

Ni-W Electrolytic Coatings

Solovei P., Krechkovska S., Shabatura D.-H.

Analysis of the Structural and Mechanical State of Heat-Resistant Steel Operated in Steam Turbine Blades

Shliakhetka Kh., Balog M., Krizik P., Krajnakova P., Seabra F. M., Zhao Yu.

Impact of Gas Nitriding of 3D-Printed Ti6Al4V Alloy: Microstructural Evolution and Corrosion Characteristics

Shtefan V., Fernández Navas N., Gebert A.

Electrochemical Behavior as an Indicator of Functional Performance Control in Bulk Metallic Glasses

Kryvous A., Snizhna Kr., Kryvous T., Snizhnoi G.

Influence of Oxidation on the Stability of the Forward Voltage of Power Diodes in Disk-Type Design

Chernov I., Zuyok V., Kolodiy I., Bereznyak O., Tretyakov M., Rud R., Pylypenko M.

Corrosion Resistance of Dysprosium Complex Oxide Compound Pellets in a Model Environment of VVER-1000 Primary Coolant

Bratochkin О., Nyrkova L.

Solutions of Different Corrosivity at Cathodic Polarisation

Danyliak M.-O.

The Anti-Corrosion Performances of the Eco-Friendly Pigments Based on Natural Montmorillonite Loaded with Zinc Cations and/or Phosphate Anions

Dzhus A., Narivskyi O., Pashchenko A., Voskoboinikov D.

Relationship Between the Limit Potentials of 06KHN28MDT Alloy and its Characteristics in a Chloride-Containing Medium

Fedoriv V.

Corrosion Inhibition of Carbon Steel in a Mildly Alkaline Environment by Composition of Biopolymer and Carboxylate

Halaichak S., Danylchuk M., Zasadna V.

Functional Properties of Nickel-Based Electrodeposited Coatings for the Hydrogen Evolution Reaction

Lisovskiy Yu., Nyrkova L., Lisovyi P., Onishchenko V.

Stress-Corrosion Cracking of Welded Joint of X70 Steel with Concentrator in Weld

Shcholokova A., Kanunnikova N., Shtefan V.

Modification of Black Chromium Coatings for Improved Corrosion Protection

Sobodosh N.

Inhibition of Aluminium Alloy Corrosion by Compositions Based on Sodium alginate and Zinc Salts in Chloride-Containing Medium