Modern Problems of Materials Science

Rabiei M., Padgurskas Ju., Rukuiza R.

A Brief Overview of Thermally Activated Delayed Fluorescence (TADF) Light Emitting Electrochemical Cells (LEECs)

Adzhamskyi S., Kononenko G., Podolskyi R., Safronova O., Baduk S.

Determination of Rational Parameters of LPBF in Order to Reduce Porosity

Canul Varguez B. J., Reyes Trujeque J., Soria Castro M., Quintana Owen P., Manrique Ortega M.

Application of Ca(Zn(OH)₃)₂·2H₂O (CZ) and MgO Nanoparticles for Consolidation Stones

Babachenko O., Kononenko G., Kimstach T., Podolskyi R., Safronova O.

Improving the Chemical Composition of High-Strength Special-Purpose Steels with the Formation of a Bainite Structure

Pedchenko Ye., Kostetskyi Yu., Polishko G., Petrenko V., Zaitsev V.

Recycling of Nickel Alloy Scrap and Waste Using the ESR Method in the Conditions of Limited Resources of RAW Materials to Preserve the Chemical Composition and Properties

Chudinovych O., Vedel D., Korichev S., Zamula M.

Interaction of Europium Oxide with Iron Oxide at 1300°C

Fatieiev D., Bychko I.

Influence of Hydride Phase on Hydrogenation Activity of the Cobalt Inermetallic Alloy

Kononiuk O., Vlad Kh.

Influence of Nanostructured Additives (Fe,Co,Ni)xOy on the Mechanochemical Hydrogenation of Mg

Kliuiev E., Ahaiev R., Vlasenko V., Dudlia K.

Potential Corrosion Challenges in the Extraction of Hydrogen and Methane by Pyrolysis of Carbonaceous RAW Materials

Kovbasiuk T., Kyrysha A., Hladchenko Z.

Technology of Applying Ni3B – Metal-Ceramic Tracks by Multilayer Screen Printing Method

Kyryliuk S., Tolochyn O., Bagliuk G., Tolochyna O., Kyryliuk Y.

Influence of Hot Forming Parameters on the Structure and Properties of the Alloy Inconel 625

Lemishka I., Kovbasiuk T., Andreiliv A., Halienkova O., Melashchenko O.

Microstructure and Granulometric Characteristics of Heat-Resistant Alloy Powders

Baranovska O., Baranovskyi D.

Microstructure and Tribological Performance of Reinforced Titanium Matrix Composites

Vlad Kh., Verbovytskyy Yu., Zavaliy I.

Electrochemical Properties of Ni–Fe Raney-Type Nanopowders Obtained via Leaching

Oryshych D., Stasiuk O.

Impact of Chemical Composition on Elastic Modulus of Ti-Zr-Nb Alloys

Osadchuk S., Nyrkova L.

Influence of Solution Layer Thickness on the Mechanism of Stress Corrosion Cracking of Low-Alloy Steel in a Simulated Soil Solution

Stasiuk O., Oryshych D., Taran S.

Effect of Powder Type on Microstructure and Mechanical Properties of Biocompatible Ti-Zr-Nb-Ta Alloy

Tolochyna O., Kyryliuk S., Kapp M., Danylenko V., Tolochyn O.

The Influence of the Shear Component of Deformation on the Microstructure Formation and Strength of Powder Materials

Tsaryk B., Makhnenko O.

Softening of Material During Friction Stir Welding of Aluminum Alloy 2219-T81

Ziqiao Zh.

Use of Epoxy-Modified Flux Systems for Underwater Submerged ARC Welding

Oprysk V., Verbovytskyy Yu.

Structural and Electrochemical Hydrogenation Characteristics of Y-Containing RNi3-xMnx (R = Y and lanthanides; x = 0…2) Alloys

Fasol Ye., Kubich V.

Influence of Yttrium Concentration on the Crystal Lattice Parameters of Sealing Coatings Applied by Flame Spraying Method

Yurchenko Yu., Sokolovskyi M.

Development of Technological Equipment for Laser Welding of Thin-Walled Joints from Corrosion-Resistant Steels

Teplinska M.-S., Zaremba O., Demchenko P., Kordan V., Gladyshevskii R.

Electrochemical Properties of Ba2HoCu3O7

Makrukha T., Prystash M.

Plasma Technologies for the Synthesis of Wear-Resistant Multifunctional Metal Matrix Composites of the Cu–Ti–TiC System

Khokhlov M., Gornostai O., Dyman M.

Mechanical Properties of Magnesium-Based Alloys for Orthopedic Applications

Naumenko M., Pedchenko Ye., Kostetskyi Yu., Rokytska O., Karpets M., Lukyanchuk D.

Properties of Fе-Mn-C-Al Steel, Alloyed with Cr, Si and Cu, After Electroslag Remelting

Shyshkina Yu., Rešetič A.

UV-Curable Polymer-Dispersed Liquid Crystal Elastomers

Demianchuk D.

Investigation of Brittle Fracture Resistance of Pipeline Steel Considering In-Service Conditions and Notch Orientation

Babchuk R., Uschapovskyi D., Vasyliev G.

Influence of Slicing on the Morphology and Structure of Deposited Copper

Zasadna V., Marchuk I., Bukliv R., Kaniuk Yu.

Application of Microcrystalline Cellulose/Polyaniline Composite for Removal of Food Dye Tartrazine from Aqueous Solutions

Shved M., Klimenko I., Belous V., Ovcharenko V., Tolmachova G., Podhurska V., Ishchenko M., Babayev I., Kuprin O.

Development and Investigation of Wear-Resistant Nitride Coatings on VT6 Titanium Alloy

Valchuk I., Hetman M., Kovtun O., Dytyniuk V.

Coatings to Prevent Adhesive wear in Steels

Lavrys S.

Microstructure and Corrosion Resistance of Nitrided Titanium Alloy Fabricated by Selective Laser Melting

Tyshyk Yu., Kuprin O., Reshetniak O., Milewski Ja., Podhurska V.

Protective Coatings on 316L Stainless Steel for Application as Molten Carbonate Fuel Cell Current Collectors

Tsybailo I., Krechkovska H.

Structure and Mechanical Properties of Heat‑Resistant Steel Restored after Long‑Term Operation in a TPP Steam Pipeline

Luzhetskiy R.

Ni-W Electrolytic Coatings

Solovei P., Krechkovska S., Shabatura D.-H.

Analysis of the Structural and Mechanical State of Heat-Resistant Steel Operated in Steam Turbine Blades

Shliakhetka Kh., Balog M., Krizik P., Krajnakova P., Seabra F. M., Zhao Yu.

Impact of Gas Nitriding of 3D-Printed Ti6Al4V Alloy: Microstructural Evolution and Corrosion Characteristics

Taras Kovbasiuk, Tetiana Tepla, Maxim Palchevskyi

Establishing the Causes of Premature Failure of Composite Reinforcement with Unidirectional Discrete Fibers

Igor Chernov, Victor Romankov, Serhii Malykhin, Igor Kolodiy, Olexandr Kalchenko

Influence of MoO3 and HfO2 Particle Size on the Phase Composition and Density of Dysprosium Hafnate Pellets

Kostyantyn Korotkov, Anatoliy Kasumov, Aleksander Dmitriev

Effects in Gd2O3 and Glass Substrates on the Resistance of Fe Nanoscale Films to Direct Current (DC) Voltage

Dmytro Makhota, Olexandr Sukhatskyi, Lina Bobrova, Tetyana Butyrina, Vyacheslav Protsenko

Application of Deep Eutectic Solvents to Prepare Electrocatalysts for Green Hydrogen Production

Oleksii Maruzhenko, Yevgen Mamunya, Yurii Klymenko, Maksym Iurzhenko, Andrii Pylypenko

Electroactive Polymer Composites with Segregated Structure

Yelizaveta Fasol, Vadim Kubich

Analysis of the Coefficient of Linear Thermal Expansion of Sealing Coatings of Gas Turbine Engine Parts

Sergey Yushkevich, Oksana Korniienko, Olesia Pavlenko, Olena Olifan, Anatoliy Samelyuk, Irina Subbota

Interaction Cerium Oxide with Lanthanum and Neodium at 1500°C

Oleksandr Cherniyenko, Oleksandr Bochechka, Vladyslav Vienikov, Anna Liamtseva

Kinetics of the Densification of Polycrystals Sintered by the Hpht Method from Diamond Powder Synthesized in the System Mg–Zn-B-C Coated by Titanium

Denys Oryshych, Oleksandr Stasiuk

Microstructure and Damping Properties Features of Ti-Al Alloys

Carlos Alexis Ortiz Garza, Javier Reyes Trujeque, William Alejandro Talavera Pech, Edgar Casanova González

Removable Substrate for Surface Enhanced Raman Spectroscopy for the Study of Pigments from the Colonial Era

Mykhailo Voron, Serhiy Schwab, Roman Selin

Electron-Beam Casting Technology for Production of Non-Standard Titanium Alloys for Experimental Production and Additive Technologies