Abstracts
Materials Science and Surface Engineering: MSSE2025 Proceedings
For scientists and engineers specialized in materials science, physico-chemical mechanics of materials and diagnostics.
Editor-in-Chief Z.T. NAZARCHUK, Academician of the NAS of Ukraine, D.Sc., Prof.
DOI https://doi.org/10.15407/msse2025.01
ISBN 978-966-02-9670-1 (серія)
ISBN 978-617-14-0432-8
- A Brief Overview of Thermally Activated Delayed Fluorescence (TADF) Light Emitting Electrochemical Cells (LEECs) Rabiei M., Padgurskas Ju., Rukuiza R.
- Determination of Rational Parameters of LPBF in Order to Reduce Porosity Adzhamskyi S., Kononenko G., Podolskyi R., Safronova O., Baduk S.
- Application of Ca(Zn(OH)₃)₂·2H₂O (CZ) and MgO Nanoparticles for Consolidation Stones Canul Varguez B. J., Reyes Trujeque J., Soria Castro M., Quintana Owen P., Manrique Ortega M.
- Improving the Chemical Composition of High-Strength Special-Purpose Steels with the Formation of a Bainite Structure Babachenko O., Kononenko G., Kimstach T., Podolskyi R., Safronova O.
- Recycling of Nickel Alloy Scrap and Waste Using the ESR Method in the Conditions of Limited Resources of RAW Materials to Preserve the Chemical Composition and Properties Pedchenko Ye., Kostetskyi Yu., Polishko G., Petrenko V., Zaitsev V.
- Interaction of Europium Oxide with Iron Oxide at 1300°C Chudinovych O., Vedel D., Korichev S., Zamula M.
- Influence of Hydride Phase on Hydrogenation Activity of the Cobalt Inermetallic Alloy Fatieiev D., Bychko I.
- Influence of Nanostructured Additives (Fe,Co,Ni)xOy on the Mechanochemical Hydrogenation of Mg Kononiuk O., Vlad Kh.
- Potential Corrosion Challenges in the Extraction of Hydrogen and Methane by Pyrolysis of Carbonaceous RAW Materials Kliuiev E., Ahaiev R., Vlasenko V., Dudlia K.
- Technology of Applying Ni3B – Metal-Ceramic Tracks by Multilayer Screen Printing Method Kovbasiuk T., Kyrysha A., Hladchenko Z.
- Influence of Hot Forming Parameters on the Structure and Properties of the Alloy Inconel 625 Kyryliuk S., Tolochyn O., Bagliuk G., Tolochyna O., Kyryliuk Y.
- Microstructure and Granulometric Characteristics of Heat-Resistant Alloy Powders Lemishka I., Kovbasiuk T., Andreiliv A., Halienkova O., Melashchenko O.
- Microstructure and Tribological Performance of Reinforced Titanium Matrix Composites Baranovska O., Baranovskyi D.
- Electrochemical Properties of Ni–Fe Raney-Type Nanopowders Obtained via Leaching Vlad Kh., Verbovytskyy Yu., Zavaliy I.
- Impact of Chemical Composition on Elastic Modulus of Ti-Zr-Nb Alloys Oryshych D., Stasiuk O.
- Influence of Solution Layer Thickness on the Mechanism of Stress Corrosion Cracking of Low-Alloy Steel in a Simulated Soil Solution Osadchuk S., Nyrkova L.
- Effect of Powder Type on Microstructure and Mechanical Properties of Biocompatible Ti-Zr-Nb-Ta Alloy Stasiuk O., Oryshych D., Taran S.
- The Influence of the Shear Component of Deformation on the Microstructure Formation and Strength of Powder Materials Tolochyna O., Kyryliuk S., Kapp M., Danylenko V., Tolochyn O.
- Softening of Material During Friction Stir Welding of Aluminum Alloy 2219-T81 Tsaryk B., Makhnenko O.
- Use of Epoxy-Modified Flux Systems for Underwater Submerged ARC Welding Ziqiao Zh.
- Structural and Electrochemical Hydrogenation Characteristics of Y-Containing RNi3-xMnx (R = Y and lanthanides; x = 0…2) Alloys Oprysk V., Verbovytskyy Yu.
- Influence of Yttrium Concentration on the Crystal Lattice Parameters of Sealing Coatings Applied by Flame Spraying Method Fasol Ye., Kubich V.
- Development of Technological Equipment for Laser Welding of Thin-Walled Joints from Corrosion-Resistant Steels Yurchenko Yu., Sokolovskyi M.
- Electrochemical Properties of Ba2HoCu3O7 Teplinska M.-S., Zaremba O., Demchenko P., Kordan V., Gladyshevskii R.
- Plasma Technologies for the Synthesis of Wear-Resistant Multifunctional Metal Matrix Composites of the Cu–Ti–TiC System Makrukha T., Prystash M.
- Mechanical Properties of Magnesium-Based Alloys for Orthopedic Applications Khokhlov M., Gornostai O., Dyman M.
- Properties of Fе-Mn-C-Al Steel, Alloyed with Cr, Si and Cu, After Electroslag Remelting Naumenko M., Pedchenko Ye., Kostetskyi Yu., Rokytska O., Karpets M., Lukyanchuk D.
- UV-Curable Polymer-Dispersed Liquid Crystal Elastomers Shyshkina Yu., Rešetič A.
- Investigation of Brittle Fracture Resistance of Pipeline Steel Considering In-Service Conditions and Notch Orientation Demianchuk D.
- Influence of Slicing on the Morphology and Structure of Deposited Copper Babchuk R., Uschapovskyi D., Vasyliev G.
- Application of Microcrystalline Cellulose/Polyaniline Composite for Removal of Food Dye Tartrazine from Aqueous Solutions Zasadna V., Marchuk I., Bukliv R., Kaniuk Yu.
- Development and Investigation of Wear-Resistant Nitride Coatings on VT6 Titanium Alloy Shved M., Klimenko I., Belous V., Ovcharenko V., Tolmachova G., Podhurska V., Ishchenko M., Babayev I., Kuprin O.
- Coatings to Prevent Adhesive wear in Steels Valchuk I., Hetman M., Kovtun O., Dytyniuk V.
- Microstructure and Corrosion Resistance of Nitrided Titanium Alloy Fabricated by Selective Laser Melting Lavrys S.
- Protective Coatings on 316L Stainless Steel for Application as Molten Carbonate Fuel Cell Current Collectors Tyshyk Yu., Kuprin O., Reshetniak O., Milewski Ja., Podhurska V.
- Structure and Mechanical Properties of Heat‑Resistant Steel Restored after Long‑Term Operation in a TPP Steam Pipeline Tsybailo I., Krechkovska H.
- Ni-W Electrolytic Coatings Luzhetskiy R.
- Analysis of the Structural and Mechanical State of Heat-Resistant Steel Operated in Steam Turbine Blades Solovei P., Krechkovska S., Shabatura D.-H.
- Impact of Gas Nitriding of 3D-Printed Ti6Al4V Alloy: Microstructural Evolution and Corrosion Characteristics Shliakhetka Kh., Balog M., Krizik P., Krajnakova P., Seabra F. M., Zhao Yu.
- Electrochemical Behavior as an Indicator of Functional Performance Control in Bulk Metallic Glasses Shtefan V., Fernández Navas N., Gebert A.
- Influence of Oxidation on the Stability of the Forward Voltage of Power Diodes in Disk-Type Design Kryvous A., Snizhna Kr., Kryvous T., Snizhnoi G.
- Corrosion Resistance of Dysprosium Complex Oxide Compound Pellets in a Model Environment of VVER-1000 Primary Coolant Chernov I., Zuyok V., Kolodiy I., Bereznyak O., Tretyakov M., Rud R., Pylypenko M.
- Solutions of Different Corrosivity at Cathodic Polarisation Bratochkin О., Nyrkova L.
- The Anti-Corrosion Performances of the Eco-Friendly Pigments Based on Natural Montmorillonite Loaded with Zinc Cations and/or Phosphate Anions Danyliak M.-O.
- Relationship Between the Limit Potentials of 06KHN28MDT Alloy and its Characteristics in a Chloride-Containing Medium Dzhus A., Narivskyi O., Pashchenko A., Voskoboinikov D.
- Corrosion Inhibition of Carbon Steel in a Mildly Alkaline Environment by Composition of Biopolymer and Carboxylate Fedoriv V.
- Functional Properties of Nickel-Based Electrodeposited Coatings for the Hydrogen Evolution Reaction Halaichak S., Danylchuk M., Zasadna V.
- Stress-Corrosion Cracking of Welded Joint of X70 Steel with Concentrator in Weld Lisovskiy Yu., Nyrkova L., Lisovyi P., Onishchenko V.
- Modification of Black Chromium Coatings for Improved Corrosion Protection Shcholokova A., Kanunnikova N., Shtefan V.
- Inhibition of Aluminium Alloy Corrosion by Compositions Based on Sodium alginate and Zinc Salts in Chloride-Containing Medium Sobodosh N.
- Mimosa Tannin Biomass Extract as an Environmentally Safe Corrosion Inhibitor to Enhance the Protective Properties of Rust Converter Vorobyova V.
- Effect of O2 on the Tribocorrosion of 17Mn1Si Steel in H2S Environment Vasyliv O., Ratska N.
- Environmentally Friendly Electrodeposited Ni-Mo-B Coatings for Tribocorrosion Applications Danylchuk M., Halaichak S.
- Electrochemical Degradation Mechanisms in Molten Carbonate Fuel Cells and Strategies for Corrosion Mitigation Majewska K., Szczesniak A., Dybinski O., Martsinchyk A., Shuhayeu P., Podhurska V., Kuprin O., Milewski Ja.
- Comparison of Methods for Analyzing Corrosion-Active Non-Metallic Inclusions in Steels Hural T., Datsko B., Vynar T.
- Hydrogen Diffusion and Trapping in Materials: the Effect of Temperature and Plastic Strain Hembara N., Sapuzhak Y.
- Model of Residual Life of a Plate with a Crack System under Corrosive Environment and Maneuver Loading Mode Dolinska I., Skalskyy T.
- Effect of Long-Term Operation of Gas Pipeline on Stress-Corrosion Cracking under Cathodic Polarization Kharchenko Yu., Nyrkova L.
- Bending of Multi-Connected Plates with Elliptic Inclusions Koshkin A.
- Assessment of Brittle Fracture Strength of Welded Control Rods in the WWER-1000 Nuclear Reactors Makhnenko O., Milenin O.
- Comparison of the Effectiveness of Reinforcing a Pipeline Section with a Wall Thinning Defect by a Welded Sleeve and a Patch Plate Vorona H., Makhnenko O.
- On Consideration of Transmission Conditions for a Multilayered Poroelastic Rectangle with a Thin Interface Zhuravlova Z.
- Low Cycle Fatigue Behavior of DP980 Steel Gas Metal ARC Welding Joints Rosado-Carrasco J. G., Gonzalez-Zapatero W. F., Ambriz R. R., Jaramillo D.
- Influence of SiC Quality on the Mechanical Properties and Oxidation Resistance of Ultra-High Temperature Composites Based on HfB₂–Si Cobtained by Hot Pressing Barvitskyi P., Prikhna T., Unsal H., Lokatkina A., Rychev S., Bilorusets V.
- Impact of Material Degradation on the Residual Life of a Composite Bimetallic Plate at High Temperature Dolinska I., Liubchak M.
- Effect of Pre-Strain on the Fragmentation of Hydrogen-Charged Steel 45 under Explosive Loading Hrynenko M., Ivanytskyi Ya.
- The Effect of Using Environmentally Friendly Fillers in Composite Matrices to Reduce Friction on Surfaces Nugroho A. D., Padgurskas J.
- Stress Concentration in an Anisotropic Body Containing a Periodic System of thin Elastic Inclusions Filipov M.
- Influence of Hydrogen Concentration and Crack Geometry on the Residual Lifetime of Pipeline Steels Soviak I.
- Torsion of a Transversely Isotropic Elastic-Plastic Solid with a Healed Disc-Shaped Crack Melnyk V.
- Free Transverse Vibrations of a Load-Bearing Rope with Spring-Compliant Supports at Different Levels Sliepko T., Ganzyuk A., Lytvynov O.
- Modeling the Stress–Strain State of a Cylindrical Shell Under Explosive Loading Using the Explicit Dynamics Method Oborniev I.
- Stress State of Anisotropic Plane with Curvilinear Anisotropic Inclusion Chornenkyi A.
- Spectral Density Bias Estimation for Periodically Non-Stationary Random Processes Khmil R., Yuzefovych R.
- Development of an Artificial Neural Network to Predict the Corrosion Rate in Carbon Steels Under Atmospheric Conditions Morales M. N., Pech Pech I. E., Domínguez Rodríguez G., May Tzuc O. de J., Corvo Perez F. E.
- Theoretical Analysis of the Mean Square Estimator Errors of Basic Frequency Sliepko R., Lychak O., Javorskyj I.
- Control of Hydrogen Charging Intensity in the Subsurface Layers of Steel Parts Based on the Analysis of Wear Particle Images Borkut A., Kolesnikov V., Marynchenko Ye., Danylovych O.
- Hilbert Transform of Biperiodically Non-Stationary Random Signals Pelypets R., Yuzefovych R., Lychak O.
- Acoustic Plane Wave Scattering from a Truncated Semi-Infinite Soft Cone with an Internal Spherical-Cap Termination Lysechko V.
- Estimation of the Basic Frequencies of the Deterministic Components at Gas-Turbine Engine Vibration Signal Sbrodov Ye., Torba Yu., Yuzefovych R.
- Visualization of Hidden Cracks in Ferromagnetic Materials by Magnetoptical Method Stasyshyn I., Maksymenko O.
- Processing of Vibrodiagnostics Signals Using Specialized Portable Devices Sharamaga R., Lychak O., Javorskyj I.
- Optimization of Directional Solidification of Heat-Resistant Alloys for Critical Castings Noha V., Kvasnytska K., Veis V.
- Study of the Characteristics of a Rolling Bearing with an Outer Ring Installation Defect Komarnytskyi B., Yuzefovych R., Lychak O.
- Adaptation of the Shearography Method for Detection of Micro-Defects in Aluminium Welded Joints and Thin-Walled Composites Shutkevych O., Stelmakh D.
- Fusion of UAV Photogrammetry and Deep Learning for Diagnostics of Large-Scale Structures Stelmakh D., Shutkevych O., Khramkov O.
- Direct Neural Network Calculation of Residual Stresses from Wrapped Speckle Interferometry Phase Patterns Khramkov O., Stelmakh D., Shutkevych O.
- Mathematical Modeling of Electrocardiographic Signals Using Temporal Rhythm and Amplitude Variability Functions Mosiy L., Sverstiuk A.
- Development of Approaches to the Integration of Regional Specialized Gis and Remote Sensing Data Ivchenko D., Alokhina O.