Abstracts 2023
Materials Science and Surface Engineering: MSSE2023 Proceedings
For scientists and engineers specialized in materials science, physico-chemical mechanics of materials and diagnostics.
Editor-in-Chief Z.T. NAZARCHUK, Academician of the NAS of Ukraine, D.Sc., Prof.
DOI https://doi.org/10.15407/msse2023
ISBN 978-966-02-9670-1 (серія)
ISBN 978-617-14-0115-0
- Establishing the Causes of Premature Failure of Composite Reinforcement with Unidirectional Discrete Fibers Taras Kovbasiuk, Tetiana Tepla, Maxim Palchevskyi
- Influence of MoO3 and HfO2 Particle Size on the Phase Composition and Density of Dysprosium Hafnate Pellets Igor Chernov, Victor Romankov, Serhii Malykhin, Igor Kolodiy, Olexandr Kalchenko
- Effects in Gd2O3 and Glass Substrates on the Resistance of Fe Nanoscale Films to Direct Current (DC) Voltage Kostyantyn Korotkov, Anatoliy Kasumov, Aleksander Dmitriev
- Application of Deep Eutectic Solvents to Prepare Electrocatalysts for Green Hydrogen Production Dmytro Makhota, Olexandr Sukhatskyi, Lina Bobrova, Tetyana Butyrina, Vyacheslav Protsenko
- Electroactive Polymer Composites with Segregated Structure Oleksii Maruzhenko, Yevgen Mamunya, Yurii Klymenko, Maksym Iurzhenko, Andrii Pylypenko
- Analysis of the Coefficient of Linear Thermal Expansion of Sealing Coatings of Gas Turbine Engine Parts Yelizaveta Fasol, Vadim Kubich
- Interaction Cerium Oxide with Lanthanum and Neodium at 1500°C Sergey Yushkevich, Oksana Korniienko, Olesia Pavlenko, Olena Olifan, Anatoliy Samelyuk, Irina Subbota
- Kinetics of the Densification of Polycrystals Sintered by the Hpht Method from Diamond Powder Synthesized in the System Mg–Zn-B-C Coated by Titanium Oleksandr Cherniyenko, Oleksandr Bochechka, Vladyslav Vienikov, Anna Liamtseva
- Microstructure and Damping Properties Features of Ti-Al Alloys Denys Oryshych, Oleksandr Stasiuk
- Removable Substrate for Surface Enhanced Raman Spectroscopy for the Study of Pigments from the Colonial Era Carlos Alexis Ortiz Garza, Javier Reyes Trujeque, William Alejandro Talavera Pech, Edgar Casanova González
- Electron-Beam Casting Technology for Production of Non-Standard Titanium Alloys for Experimental Production and Additive Technologies Mykhailo Voron, Serhiy Schwab, Roman Selin
- The Use of Rare Earth Fluorides as Flux Components in Tig Welding of Titanium Serhiy Schwab
- Recycling of Steel Using the Esr Method in the Conditions of Limited Resources of Raw Materials to Preserve the Chemical Composition and Properties Yevhen Pedchenko, Yuriy Kostetsky, Ganna Polishko, Volodymyr Petrenko, Volodymyr Zaitsev
- Synthesis of a Complex of Ferulic Acid Incorporation into the Cavity of Modified Β-Cyclodextrin Yuliana Malykhina, OlenaChyhyrynets
- Development and Research of Bainetic Steels for Railway Rails Olexander Babachenko, Ganna Kononenko, Oleksii Merkulov, Rostislav Podolskyi, Elena Safronova
- Analysis of the Experience of Manufacturing Metal Stents from Different Alloys Using Traditional and Additive Technologies Serhii Adzhamskyi, Ganna Kononenko, Rostyslav Podolskyi, Elena Safronova, Serhii Baduk
- Influence of the Raw Powders Treatment Parameters on the Transmittance of Ir-Transparent Y2O3 Ceramics Dariia Chernomorets, Jan Hostaša
- Influence of Oxygen-Stabilized Η-Phase on the Hydrolysis Properties of MgH2 Olexander Kononiuk
- Influence of Structural Factor on Mechanical Characteristics of Austenitic Steels in Liquid Lead at Elevated Temperatures Ivan Kukhar
- Study of the Titanium-Based Coatings Structure Obtained by the Cold Spray Deposition Method Dmytro Pakula, Oleksandr Stasiuk, Denys Oryshych, Vitaliy Bevz, Andriy Tarasiuk
- Fracture Peculiarities of Nitinol under Low-Cycle Fatigue Volodymyr Budz, Halyna Krechkovska, Volodymyr Iasnii
- Mechanical Energy Absorption Ability of Titanium Porous Structures Produced by Powder Metallurgy Approach Oleksandr Stasiuk, Denys Oryshych
- Deposition of Calcium Phosphate Coating on Titanium Depends on Electrolyte Composition Roman Proskurniak, Oleh Tkachuk
- Structure and Mechanical Properties of Steel Steam Turbine Rotor Blades after Operation Petro Solovei, Ivan Tsybailo, Sofiia Krechkovska
- FSW Linear Speed Impact On Structure And Mechanical Properties Of Az31 Magnesium Alloy Joints Maksym Khokhlov, Yuliia Khokhlova, Anatolii Pokliatskyi, Valery Kostin
- Features of Chronoamperometric Studies of Water Sorbent Materials Khrystyna Vlad
- The Use of Computer Modeling to Optimize the Technological Modes for the Manufacture of Thermoelectric Materials by the Method of Vertical Zone Melting Denis Rybchakov
- Effect Of Mg2++Si4+ Complex Additive On Consolidation Features, Microstructure And Optical Properties Of Yag, Yag:Sm3+ Ceramics Arsenii Tymoshenko, Ihor Vorona, Roman Yavetskiy, Sergey Parkhomenko, Andrey Doroshenko, Olexandra Kryzhanovska, Nadiia Safronova, Olexander Tolmachev
- A Novel Ir-Transparent Ho3+:Y2O3–MgO Nanocomposite Ceramics For Potential Laser Appliccation Anton Balabanov, Nadiia Safronova, Olexandra Kryzhanovska, Mariia Dobrotvorska, Ihor Vorona, Olexander Tolmachev, Roman Yavetskiy
- DFT Study of Point Defects in Yttrium Aluminum Garnet Doped with Carbon Hermash K. V., Fil D. V.
- Growth of Cd0.9Zn0.1Te1-ySey Crystals for Radiation Detection Applications Kapustnyk O.K., Sofronov D.S., Terzin I.S., Naydenov S.V., Prytula I.M., Kovalenko N.O
- Synthesis, Structure and Electrochemical Properties of the NdY2Ni9-xMnx Alloys Volodymyr Oprysk, Yuriy Verbovytskyy
- Microstructure and Mechanical Properties of Low Cost Beta Ti–2.8Al–5.1Mo–4.9Fe Titanium Alloy Welded Joints Roman Selin, Serhiy Schwab
- Influence of Air Pressure on the Properties of Arc Coatings Volodymyr Hvozdetskyi, Khrystyna Zadorozhna, Taras Artym, Bohdan Trembach, Illia Trembach
- Methods of Improving the Corrosion Resistance of an Additively Manufactured Titanium Alloy Serhii Lavrys, Mariia-Olena Danyliak, Taras Gural
- Tribological Properties of Tin And Crn Cathodic Arc Coatings on Ti-6al-4v Alloy Illia Klimenko, Vitalii Belous, Valerii Ovcharenko, Halyna Tolmachova, Oleksandr Kuprin, Victoria Podhurska, Mykhaolo Ishchenko, Ivan Babayev
- Ru-Supported Anode for Improving Catalytical Properties in Molten Carbonate Co-Electrolysis for Efficient E-Fuels Synthesis Aliaksandr Martsinchyk, Krystsina Razumkova, Katsiaryna Martsinchyk, Arkadiusz Szczęśniak
- Development of Protective Coating for Molten Carbonate Fuel Cell Current Collector Viktoriya Podhurska, Pavel Shuhayeu, Oleksander Kuprin, Jaroslav Milewski
- Hyflow – a Novel System for E-Fuel Synthesis Aliaksandr Martsinchyk, Monika Łazor, Katsiaryna Martsinchyk, Pavel Shuhayeu, Arkadiusz Baran
- Improving the Performance Characteristics of the Resistance Spot Welding Electrode by Impulse Laser Alloying Yana Pavliuk, Oleksandr Filatov, Patrick Van Rymenant, Alexander Pogorelov, Jurgen Adriaensen, Dmytro Pavliuk
- Investigation of the Co-Free Spinel Used in a Role of Protective Layers in Soc Application Monika Łazor, Leszek Ajdys, Yevgeniy Naumovich, Blanka Seredyńska, Paulina Wiecińska, Agnieszka Żurawska
- Stress-Corrosion Cracking of Pipe Steel Under the Influence of Thin-Film Corrosion at Cathodic Polarization Oleh Bratochkin, Lyudmyla Nyrkova, Svitlana Osadchuk
- The Anti-Corrosion Performances of the Eco-Friendly Composition Based on Gum Arabic and Zinc Acetate for Low-Alloy Steel Mariia-Olena Danyliak
- Electrochemical Production Of Ni-Mo Coatings Svitlana Halaichak, Maxym Danilchuk
- Comparative Studies of Stress-Corrosion Cracking of Long-Term Operated Main Gas Pipeline Pipe and Storage Pipe Made Of X70 Steel Yuliya Kharchenko, Lyudmyla Nyrkova, Larysa Goncharenko
- Oxidation Resistance of (Zr, Hf)B2 Solid Solution Dmytro Vedel, Petro Mazur
- Aluminum Alloy Corrosion Inhibition by Sodium Alginate in 0.1% NaCl Solution Natalia Sobodosh, Andriy Bania
- Plate-Like Heat Exchangers Resistance Made of Alloy 06KhN28MDT (Similator to AISI904L Steel) to Crevice Corrosion Anna Dzhus, Oleksiy Narivskyi, Gennadii Snizhnoi, Tetiana Pulina, Valentyn Snizhnoi, Sergiy Sheyko
- Syntesys of Anti-Corrosion Pigment Based on Nanoporous Zeolite and Zinc Monophosphate Bohdan Datsko
- Release of Corrosive Gases under Action of Thermal Processing of Solid Carbon-Contained Raw Materials Ruslan Ahaiev, Vasyl Vlasenko,Kateryna Dudlia, Eduard Kliuiev
- Prediction of the Process of Corrosion Formation of Steel Degasation Pipelines Leonid Shyrin, Rostyslav Yehorchenko
- Evaluating the Corrosion Resistance of the Novel Al-Aln Metal Matrix Composites Produced Of Hot Direct Extrusion Khrystyna Shliakhetka, Martin Balog, Erik Simon, Moara Marques De Castro
- The Peculiarities of Corrosion-Mechanical Destruction of Welded Joint from Controllable Rolled Steel under Cathodic Polarization Yurii Lisovskiy, Lyudmyla Nyrkova, Larysa Goncharenko, Leonid Feinberg
- Simulation of Creep Crack Growth under the Action of Neutron Irradiation Iryna Dolinska, Orest Svirchevskyi
- Crack Healing in a Transtropic Elastic Body under Torsion Maksym Filipov
- Prediction of the Residual Durability of Structural Elements under the Dual Influence of Hydrogen Nazar Hembara
- Substantiation of the Possibility of Repairing Sucker Andriy Stefanyshyn, Bohdan Bakun, Ihor Kopei, Halyna Krechkovska, Oksana Stefanyshyn
- Hydrogen Embrittlement Behavior of Plastically Pre-Strained and Hydrogen-Charged low alloy Steel Mykhailo Hrynenko
- Assessment of the Residual Lifetime of a Defective Pipeline at Different Hydrogen Concentrations in the Metal Yaroslav Sapuzhak, Ivanna Soviak
- The Investigation of Stress State of an Axisymmetric Poroelastic Cylinder Zinaida Zhuravlova
- Stress State of an Orthotropic Plate at the Curvilinear Holes Andrii Chornenkyi
- The Residual Resource Assessment of a Oil Pipeline With a Surface Defect under the Load and Environmental Factors Iryna Dolinska, Mykola Liubchak
- Evaluation of the Period Initiation Of Fatigue Microcrack on the Surface of the Wheelset Axle of a Railway Car Yurii Kanyuk
- The Application of a Biconical Scatterer for Modeling of the Plane Surface Defect in the Presence of the Conical Probe Oleksiy Sharabura
- Acoustic Plane Wave Scattering From a Truncated Semi-infinite Soft Cone at Axial Incidence Victor Lysechko, Oksana Trishchuk
- Visual Corrosion Assessment of Structural Steels Using Neural Networks Oleh Venhryniuk
- Diagnostic Algorithm Quality of the State of Underground Metal Structures the Using Neural Networks Vitalii Lozovan
- Information System for Research of Solar-Terrestrial Coupling Danylo Ivantyshyn
- Experimental Method of Investigating the Effect of Low-Velocity Impact on Damping Capacity of Multilayer Woven CFRP Oleh Derkach, Valerii Kobzar
- Application of the Magneto-Optical Effect in Non-Destructive Testing Ihor Stasyshyn, Olha Suriadova
- Remote Inspection Of Kyiv Tv Based on the Application of Unmanned Aircraft (Uav) and the Photogrammetry Method Dmytro Stelmakh, Oleksii Shutkevych, Inna Shkurat
- Application of Electro-Plasticity Effect and Shearography Method for Non-Destructive Determination of Residual Stresses Oleksii Shutkevych, Dmytro Stelmakh, Inna Shkurat
- Investigation of Vibrations in Dry Friction Pair using PNRP Methods Roman Sliepko, Roman Yuzefovych, Oleh Lychak
- Lake Water Volume Calculation Using Bathymetric Survey, RS and GIS Dariya Ivchenko, Olga Alokhina, Mykola Korus
- Analysis of the Magnetic Field Anomalies of a Pipe with Defect Vasyl Dzhala, Maryan Melnyk